industrial repair agent > cast iron-based repair rebuilding compound epoxy coatings

cast iron-based repair rebuilding compound epoxy coatings

BD111 cast iron-based repair rebuilding compound wear abrasion resistant epoxy coating

Product description of our BD111 cast iron repair special anti abrasion wear resistant ceramic coating
rebuliding compound:
It’s the high performance polymerization metal materials compounded by various alloy material and modified toughening
heat resistant resin,suitable for the repairing of gray iron, ductile iron, casting defect and parts wear,corrosion,fracture.
The color after repairing is basically the same as the substrates,with the very high strength and excellent wear&corrosion
resistance and aging resistant properties,can do various mechanical processing together with substrates.

Performance index:

product name	physical state	standard packaging	volume (cm3)	operational time limit (25℃)	usable time (25℃)
BD111 cast iron-based repair rebuilding compound epoxy coating	paste	500g/set Two-component	309	45min	24h

Main physical mechanical properties:

color	density (g/cm3)	compressive strength (kg/cm2) GB1041-2008	tensile strength (kg/cm2) GB6329-2008	shear strength (kg/cm2) GB7124-2008	bending strength (kg/cm2) GB1042-1999	hardness （Shore D） ASTM-D-2556	working temperature （℃）
iron	1.61	977	324	189	563	90	-60～166

How to use:
1.Surface treatment: Do the coarsening treatment on the surface of pending-repair parts and clean it by cleaning agent.

2.Configuration: According to the mass ratio A:B=7:1 or volume ratio A:B=4:1,make A and B two components mix uniformly,
then use it up within specified operation time limit.

3.Coating: Make the mixed-up material spread coating on the pending-repair areas layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.
If the following working procedure needs machining,should keep out appropriate machining allowance

4.Curing: Cure for 8 hours at the temperature of 25～30 degree before doing machining, cure for 24 hours before putting it into use, if the temperature is low,
should heat it up or prolong the curing time to promote the curing.

Packaging specification:
Two-component,500g/set,8 sets/carton or 16 sets/carton.

Transportation and storage:
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD111 high strength cast iron epoxy repair putty two parts paste compound coating:

------分隔线----------------------------